3. IACV Circuit Continuity Inspection
Disconnect the ECM 33P (Black) connector.
Check the continuities between the ECM 33P
(Black) connector terminals and the IACV 4P
(Black) connector terminals.
CONNECTION: A 19 - Black/yellow
A2.7
-
Black/red
A 16- Black/blue
A2.9 - Black/orange
TOOL:
Test probe
Are there continufties?
YES
- GO TO STEP 4.
NO
- • Open circuit in Black/yellow or Black/
red wire
• Open circuit in Black/blue or Black/
orange wire
4. IACV Resistance Inspection
Measure the resistance at the IACV 4P (Black)
connector terminals.
CONNECTION: Black/yellow - Black/orange
Black/red
n
STANDARD: 99
-
121
Is the resistance within 99 - 121
YES - Replace the ECM with new one. and
recheck; refer to Key Registration Proce
dures (page 21-6)
NO
- Faulty IACV
DTC 33-2 (EEPROM)
1. Recheck OTC
Clear the ECM self-diagnosis memory data (page
5-14).
Turn the ignition switch ON and engine stop
"O".
switch
Recheck the ECM EEPROM
Is the OTC 33-2 indicated?
YES
- Replace the ECM with new one, and
recheck; refer to Key Registration Proce
dures (page 21-6)
NO
- Intermittent failure
07ZAJ-RDJA 110
Black/
yellow
4P (Black) CONNECTOR
(Motor side/male terminals)
-
Black/blue
(20 °C/68
°F)
ri
(20
°
C/68
°
F'/?
FUEL SYSTEM (PGM-FI)
33P (Black) CONNECTOR
(Wire side/female terminals)
�I
-
Black/
Black/
\
orange
Black/
blue
re
d
4P (Black) CONNECTOR
(Wire side/female terminals)
Black/
orange
blue
A27
5-35