Honda CB 600F Hornet 2007 Shop Manual page 201

REMOVAL
• Always clean the throttle body before the IACV
removal to prevent dirt and debris from entering
the IACV passage.
Remove the throttle body (page 5-85}.
Remove the screws and setting plate.
Remove the IACV motor and O-ring.
INSTALLATION
Turn the slide valve clockwise until lightly seated on
IACV.
Apply oil to new O-ring and install it to the IACV
motor.
Install the IACV motor, aligning its groove with the
pin inside the motor housing.
FUEL SYSTEM (PGM- FI)
5-91