:WAVeform:YORigin
Query Syntax
:WAVeform:YORigin?
The :WAVeform:YORigin? query returns the y- origin value for the currently
specified source. This value is the Y- axis value of the data value specified
by the :WAVeform:YREFerence value. For this product, this is the Y- axis
value of the center of the screen.
Return Format
<value><NL>
<value> ::= y-origin in the current preamble in 32-bit
See Also
•
•
•
Example Code
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:YREFerence"
"Example Code"
on page 977
on page 961
on page 976
on page 994
32
:WAVeform Commands
993