Waveform:xincrement - Agilent Technologies MSO6102A Programmer's Reference Manual

:WAVeform:XINCrement

Query Syntax
:WAVeform:XINCrement?
The :WAVeform:XINCrement? query returns the x- increment value for the
currently specified source. This value is the time difference between
consecutive data points in seconds.
Return Format
<value><NL>
<value> ::= x-increment in the current preamble in 64-bit
See Also •
•
Example Code
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
"Example Code" on page 454
on page 438
on page 453
Commands by Subsystem
3
463