Sbus<N>:M1553:Trigger:pattern:data - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:SBUS<n>:M1553:TRIGger:PATTern:DATA
Command Syntax
:SBUS<n>:M1553:TRIGger:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1 | X}
The :SBUS<n>:M1553:TRIGger:PATTern:DATA command sets the 11 bits to
trigger on if the trigger type has been set to RTA11 (RTA + 11 Bits) using
the :SBUS<n>:M1553:TRIGger:TYPE command.
Query Syntax
:SBUS<n>:M1553:TRIGger:PATTern:DATA?
The :SBUS<n>:M1553:TRIGger:PATTern:DATA? query returns the current
11- bit setting.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1 | X}
See Also
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :TRIGger Commands"
":SBUS<n>:M1553:TRIGger:TYPE"
":SBUS<n>:M1553:TRIGger:RTA"
:SBUS<n> Commands
on page 843
on page 703
on page 702
26
701