Sbus<N>:Lin:trigger:pattern:data:length - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

:SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth
Command Syntax
:SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth <length>
<length> ::= integer from 1 to 8 in NR1 format
The :SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth command sets the
number of 8- bit bytes in the LIN data string. The number of bytes in the
string can be anywhere from 1 bytes to 8 bytes (64 bits). The value for
these bytes is set by the :SBUS<n>:LIN:TRIGger:PATTern:DATA command.
Query Syntax
:SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth?
The :SBUS<n>:LIN:TRIGger:PATTern:DATA:LENGth? query returns the
current LIN data pattern length setting.
Return Format
<count><NL>
<count> ::= integer from 1 to 8 in NR1 format
Errors •
See Also
•
•
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
(see page 790)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":SBUS<n>:LIN:TRIGger:PATTern:DATA"
":SBUS<n>:LIN:SOURce"
on page 753
on page 589
on page 489
on page 484
25
:SBUS<n> Commands
491