Recall:mask[:Start] - Agilent Technologies InfiniiVision 3000 Programmer's Manual

:RECall:MASK[:STARt]

Command Syntax
:RECall:MASK[:STARt] [<file_spec>]
<file_spec> ::= {<internal_loc> | <file_name>}
<internal_loc> ::= 0-3; an integer in NR1 format
<file_name> ::= quoted ASCII string
The :RECall:MASK[:STARt] command recalls a mask.
If a file extension is provided as part of a specified <file_name>, it must be ".msk".
N O T E
See Also •
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1088)
"Introduction to :RECall Commands"
":RECall:FILename" on page 568
":SAVE:MASK[:STARt]"
":MTESt:DATA" on page 482
on page 566
on page 584
24
:RECall Commands
569