Mtest:source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:MTESt:SOURce

Command Syntax
:MTESt:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:SOURce command selects the channel which is configured by
the commands contained in a mask file when it is loaded.
Query Syntax
:MTESt:SOURce?
The :MTESt:SOURce? query returns the channel which is configured by the
commands contained in the current mask file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | NONE}
<n> ::= 1 to (# analog channels) in NR1 format
See Also •
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
"Introduction to :MTESt Commands"
":MTESt:AMASk:SOURce"
on page 491
on page 496
22
:MTESt Commands
521