Mtest:rmode:faction:print - Agilent Technologies InfiniiVision 2000 X-Series Programmer's Manual

21
:MTESt Commands

:MTESt:RMODe:FACTion:PRINt

Command Syntax
:MTESt:RMODe:FACTion:PRINt <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:RMODe:FACTion:PRINt command sets printing on mask failures
on or off.
Setting :MTESt:RMODe:FACTion:PRINt ON automatically sets
N O T E
:MTESt:RMODe:FACTion:SAVE OFF.
See
information on setting the hardcopy device and formatting options.
Query Syntax
:MTESt:RMODe:FACTion:PRINt?
The :MTESt:RMODe:FACTion:PRINt? query returns the current mask failure
print setting.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also
•
•
•
•
398
(see page 790)
Chapter 17, ":HARDcopy Commands," starting on page 295 for more
"Introduction to :MTESt Commands"
":MTESt:RMODe:FACTion:MEASure"
":MTESt:RMODe:FACTion:SAVE"
":MTESt:RMODe:FACTion:STOP"
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 379
on page 397
on page 399
on page 400