Mtest:count:fwaveforms - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

22
:MTESt Commands

:MTESt:COUNt:FWAVeforms

Query Syntax
:MTESt:COUNt:FWAVeforms? [CHANnel<n>]
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:COUNt:FWAVeforms? query returns the total number of failed
waveforms in the current mask test run. This count is for all regions and
all waveforms collected on the channel specified by the optional parameter
or collected on the currently specified source channel (:MTESt:SOURce) if
there is no parameter.
Return Format
<failed><NL>
<failed> ::= number of failed waveforms in NR1 format.
See Also •
•
•
•
•
Example Code
•
500
(see page 1138)
"Introduction to :MTESt Commands"
":MTESt:COUNt:WAVeforms"
":MTESt:COUNt:TIME"
":MTESt:COUNt:RESet"
":MTESt:SOURce" on page 521
"Example Code" on page 491
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 491
on page 503
on page 502
on page 501