Print - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:PRINt

Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | BMP8bit | BMP | PNG
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used. Refer to
for more information.
See Also •
•
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 658)
| NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FORMat"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA" on page 211
":HARDcopy:FORMat"
on page 124
on page 246
on page 581
on page 249
on page 582
Commands by Subsystem
on page 581
5
155