Disable Ess Command Error Codes; Enable Ess - Avaya ESS User Manual

disable ess command Error Codes

disable ess command Error Codes
Error Code
1991
1992
1993
1994
2500

enable ess

|
S8700 | 8710 S8710
enable ess [ all | cluster n <1-999> ]
Use enable ess to enable a Main server or ESS server's ability to connect to IPSIs in Port
Networks.
Note:
A server cluster is a either a
Note:
Use enable ess from either a Main server or an ESS server. An ESS server may enable only
its own cluster ID. When enable ess is run from the Main server, any and all cluster IDs may
be enabled including the Main server itself.
When enable ess cluster <ess cluster n> is run:
if it is enabled, the ESS server does nothing. The TEST RESULTS screen indicates that
●
test 1606 passed for the ESS server. See
RESULTS example
if it is disabled, the ESS server changes its state to enabled and:
●
- removes its translations.
- performs a reset system 4 operation.
- registers with the Main server once the reset is complete.
- receives a download of translations from the Main server.
- resets a second time (after the translation download is complete).
Description
ESS cluster not administered
ESS cluster not registered
ESS cluster controlling IPSIs (Port Networks)
ESS cluster (non-main) may not disable other clusters (ESS server or
Main server)
Internal operation failed
|
S8500
S8500
on page 148.
Enterprise Survivable Servers - Maintenance Commands
or .
S8700 | 8710
Figure 43: disable ess command TEST
Issue 1.1 June 2005 149