262
Installing the S8700 Multi-Connect
Completing the Installation Administration
5
6
7
8
Upgrade Cajun Ethernet Switch Firmware (if
necessary)
Refer to
Switch Firmware
Verify translations
The following administration is done on a computer used to access the Avaya S8700 Media
Server using SAT Emulation on ASA.
1
2
3
Enable and Disable Ethernet Switch Ports
The following administration is done on the services laptop computer connected to the Avaya
S8700 Media Server using the S8700 Media Server Web Interface.
ASA - For inservice systems (high/critical configurations) move the 'active' IPSI by
using the set ipserver-interface cab/carrier command. Issue this command for each
IPSI equipped cabinet.
WEB - Repeat step 4 with the new standby IPSIs.
WEB - Click on View Firmware Activation Status to determine when the activation is
completed.
WEB - Click View IPSI Version and select "Query All" to verify that all IPSI circuit
packs have the required IPSI firmware version.
Upgrading the Avaya S8700 Media Server
for the information.
Type list configuration all and press
the S8700 Multi-Connect configuration.
Type list ipserver-interface and press
packs.
Check the administration status on the following items:
•
list station
•
list trunk-group
list hunt-group
•
list vdns
•
Configurations,
to view all the administered circuit packs in
Enter
to verify the location of the IPSI circuit
Enter
May 2002
Upgrade Cajun Ethernet