Accessing The S8300 Media Server Web Interface And P330 Device Manager Using An Ethernet Interface; Hardware And Software Requirements; S8300 Media Server Login Procedure - Avaya S8300 User Manual

Media server and gateway
Hide thumbs Also See for S8300:
Table of Contents

Advertisement

Access Procedures: Specific Access Procedures
10 . Enter the CLI commands appropriate for this interface. For example, you could:
- Type Linux shell commands to set up Operations Support System (OSS) alarm notification on
the S8300 Media Server.
- Type sat or dsat to log in to the SAT program. See Accessing SAT from a CLI for this
procedure.
- Type telnet <IP address> to access another device, such as any other administered
media gateway or P330 stack processor.
Accessing the S8300 Media Server Web
Interface and P330 Device Manager using an
Ethernet interface
This section covers how to access the S8300 Media Server Web Interface or the P330 Device Manager over
an Ethernet interface. Information includes:

• Hardware and software requirements

• S8300 Media Server login procedure

• P330 Device Manager login procedure
Hardware and software requirements
To successfully access one of these browser-based tools, your computer must have:
• A valid physical connection to the S8300 Media Server (for the S8300 Media Server Web
Interface), or to the G700 Media Gateway (for Device Manager). See Connecting to an Ethernet
interface for details.
• A compatible Internet browser:
- P330 Device Manager: supports Microsoft Internet Explorer 5.0 (or higher) and Netscape
Navigator 4.7 and 6.2 browsers. The Java Plug-in 1.2.2 or 1.3.1 is required.
- S8300 Media Server: requires either:
• Microsoft Internet Explorer 5.x (5.5 is recommended). IE 6 is not currently supported.
Internet Explorer 5.5 with Service Pack 2 (SP2) is required for initial configuration of
the S8300 Media Server.
• Netscape Navigator 4.7 or a later version of 4.x. Netscape 4.77 has been tested; other
versions may work. Netscape 6 is not currently supported.
S8300 Media Server login procedure
To access the S8300 Media Server, you must log in as follows:
1 . Establish a valid physical connection to the S8300 Media Server. See Connecting to an Ethernet
interface for details.
2 . Open a compatible Internet browser on your computer. Currently only Internet Explorer 5.x (5.5
with Service Pack 2 is recommended) and Netscape 4.7x are supported.
20
Welcome to S8300 and G700
555-234-200 — Issue 1 — May 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

G700

Table of Contents