Power Up and Initial Testing
Power Up Sequence
Remember to power up the KVM switch, the maintenance modems, and any application
servers.
Setting IP Addresses
Set IP Address for S6x00 CPU
To set the IP address for the S6200 Application Server, follow these steps:
1. Switch the KVM switch to the S6x00 CPU.
2. To be added.
Set IP Address for Application Servers
All application servers except CRS (Web Portal, Web Conferencing) run Windows 2003 Server.
For each application server, follow these steps:
1. Set the KVM switch to connect the keyboard, monitor, and mouse to the application server.
2. Click Start.
3. Select Settings |Control Panel.
4. Double-click Network Connections.
5. Select the Network Interface Card.
6. Select File | Properties (or right-click and select Properties).
7. Select Internet Protocol (TCP/IP).
8. Click Properties.
9. Enter the IP Address, Subnet Mask, and Default Gateway address from the site survey.
10. Enter the Preferred DNS Server and Alternate DNS Server addresses from the site
survey.
11. Click OK.
12. Click OK.
Power Up and Initial Testing
Issue 1 July 2006
43