Table of Contents
Advertisement
6. Configure Dialogic IMG 1010 Media Gateway
The following sections describe the configuration steps required to implement E1 and SIP trunks
and inter routing on the Dialogic IMG 1010 Media Gateway to Session Manager using the IMG
Client View software. These settings relate to this sample configuration and are by no means
exhaustive. Certain areas are not shown or may be condensed for brevity.
It is assumed that basic hardware and software installation has been described as per Section 11
References [8-10], so that the GCEMS Server and IMG 1010 have been configured with suitable
IP addresses and the Client View software opens successfully when executed. This section will
focus on the following areas:
Profiles : for IP Bearer (for SIP) and DS1 (for PSTN)
Logical IMG and Physical IMG
Configure Network Interfaces for VoIP(Data) and CPU(Signaling)
Configure Facilities (i.e. trunks for E1 and SIP)
Configure Signaling for E1 and SIP, including D Channels for ISDN
Configure External Network Elements and Gateways
Routing Configuration
Configure Channel Groups for ISDN and SIP
Configure Routing Tables and Route Entry
6.1. Connecting with Client View
Client View is the proprietary software installed on the GCEMS server used to manage the
Dialogic IMG 1010 Media Gateway. A suitable login and username as well as the IP address of
the GCEMS server are required to make a successful connection to begin managing the IMG
1010.
On initial connection the Event View window may automatically appear. This can be closed by
selecting File>Exit or by minimizing.
BD; Reviewed:
SPOC 02/26/2013
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
29 of 103
DLG1010MXSM62CS
Advertisement
Table of Contents
