Led State Definitions; Switch Leds - Avaya 8200 Installing Manual

CPU Temperature
26

LED state definitions

The figures and tables in the following sections describe the LEDs on the Avaya Virtual Services
Platform 8200 switch. The tables describe LED operation for a switch that finishes the power-on
self-test.
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source.

Switch LEDs

The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Table 14: Switch LED state indicators
Label Color and Status
PWR Off
Green (steady)
Green (blinking)
Status Off
Amber (steady)
Amber (blinking)
Green (steady)
Green (blinking)
RPS Off
Amber (steady)
Amber (blinking)
Green (steady)
December 2014
MAC Temperature PHY1 Temperature
29
Description
The switch is not receiving power and not operating.
The switch is receiving power from either one of the power
supplies (if two power supplies are installed).
The switch is resetting.
The switch is non-operational.
The switch encountered an error when running the diagnostic
software.
The switch is booting and running diagnostic software. This is
normal activity during the boot process.
The switch loaded the agent software code and is operating
normally.
The switch is loading the agent software code.
A second power supply is not present in either PSU1 or PSU2.
The second power supply in either PSU1 or PSU2 is present,
but not supplying power to the switch.
The second power supply, which was operating in either PSU1
or PSU2, was removed from the chassis.
The second power supply (in either PSU1 or PSU2) is present
and operating normally as a redundant power supply (RPS).
Comments? infodev@avaya.com
PHY2 Temperature
24 27
Installing the Avaya VSP 8200
LED state definitions
49