paintwork, the affected area must be
immediately washed down with cold water.
Disconnect the clutch slave cylinder supply line
from the transaxle.
Remove the spring clip.
NOTE: Do not disconnect the starter motor
28.
electrical connector.
Detach the starter motor from the transaxle and
position it to one side.
NOTE: Support the transaxle with wooden
29.
blocks.
NOTE: Use suitable retaining straps to secure
the transaxle on the transmission jack.
Using a suitable
transaxle.
30. Remove the transaxle left-hand retaining bolts.
31. Remove the transaxle right-hand lower retaining
bolt.
32. Using a suitable
transaxle.
http://vnx.su
transmission
jack, support the
transmission
jack, lower the