Trust - Dell S4810 Reference Manual

Pre-Defined WRED
Profile Name
wred_drop
wred_ten_y
wred_ten_g
wred_fortyg_y
wred_fortyg_g
Related wred-profile
Commands

trust

Specify dynamic classification (DSCP) or dot1p to trust.
S4810
Syntax
trust {diffserv [fallback]| dot1p [fallback]}
Parameters
diffserv
dot1p
fallback
Defaults none
Command CONFIGURATION (conf-policy-map-in)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 8.2.1.0
Quality of Service (QoS)
Minimum
Threshold
0
467
467
467
467
— creates a WRED profile.
Enter the keyword diffserv to specify trust of DSCP
markings.
Enter the keyword dot1p to specify trust dot1p
configuration.
Enter the keyword fallback to classify packets according
to their DSCP value as a secondary option in case no match
occurs against the configured class maps.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added fallback to the E-Series.
Added dot1p to the C-Series and S-Series.
Maximum
Threshold
100
0
4671 100
4671 50
4671 50
4671 25
1381