Show Ipv6 Ospf Neighbor - Dell S4810 Reference Manual

Dell#

show ipv6 ospf neighbor

Display the OSPF neighbor information on a per-interface basis.
S4810
Syntax
show ipv6 ospf neighbor [interface]
Parameters
interface
Defaults none
Command
EXEC
Modes
EXEC Privilege
Command
Version 9.1.
History
(0.0)
Version
8.3.19.0
Version 7.8.1.0
Version 7.4.1.0
Example
Dell#show ipv6 ospf neighbor gi 9/0
Neighbor ID
Interface
63.114.8.36
9/0
Dell#
Open Shortest Path First (OSPFv2 and OSPFv3)
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. For the C-Series, Z-Series, and
S4810, the range is 1 to 128.
• For a VLAN, enter the keyword vlan then the VLAN ID.
The range is 1 to 4094.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
Pri State
1 FULL/DR 00:00:38
Dead Time Interface
4
ID
Gi
1269