Match Mac Vlan - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.5.1.0
pre-Version
7.4.1.0
Usage To access this command, enter the class-map command. After the class map is
Information
identified, you can configure the match criteria.
Related class-map
Commands

match mac vlan

Configure a match criterion for a class map based on VLAN ID.
S4810
Syntax
match mac vlan number
Parameters
number
Defaults none
Command CLASS-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Usage To access this command, enter the class-map command. You can match against
Information only one VLAN ID.
Related class-map
Commands
1356
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
— identifies the class map.
Enter the VLAN ID. The range is from 1 to 4094.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced.
— identifies the class map.
Quality of Service (QoS)