Service-Queue - Dell S4810 Reference Manual

service-queue

Assign a class map and QoS policy to different queues.
S4810
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy
qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id
[class-map class-map-name] [qos-policy qos-policy-name]
command.
Parameters
queue-id
class-map
class-map-
name
qos-policy
qos-policy-
name
Defaults none
Command CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1368
Enter the value used to identify a queue. The range is from 0
to 7.
(OPTIONAL) Enter the keyword class-map then the class
map name assigned to the queue in character format (16
character maximum).
NOTE: This option is available under policy-map-
input only.
(OPTIONAL) Enter the keywords qos-policy then the QoS
policy name assigned to the queue in text format (16
characters maximum). This specifies the input QoS policy
assigned to the queue under policy-map-input and
output QoS policy under policy-map-output context.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Quality of Service (QoS)