Ip Poison-Reverse - Dell S4810 Reference Manual

ip poison-reverse

Set the prefix of the RIP routing updates to the RIP infinity value.
S4810
Syntax
ip poison-reverse
To disable poison reverse, use the no ip poison-reverse command.
Defaults Disabled.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Related ip split-horizon
Commands
ip rip receive version
To receive specific versions of RIP, set the interface. The RIP version you set on the interface overrides
the version command in ROUTER RIP mode.
S4810
Syntax
ip rip receive version [1] [2]
To return to the default, use the no ip rip receive version command.
Parameters
1
1396
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— sets the RIP routing updates to exclude routing prefixes.
(OPTIONAL) Enter the number 1 for RIP version 1.
Routing Information Protocol (RIP)