Configuring Cluster Parameters - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches

2.2.6 Configuring Cluster Parameters

I. Configuring cluster parameters manually
Table 2-7 Configure cluster parameters manually
Operation
Enter system view
Specify
management
VLAN
Enter cluster view
Configure an IP
address pool for
the cluster
Configure a cluster
with the
switch
management
device
Configure
multicast
address
cluster
Set the interval for
the management
device
multicast packets
Configure
holdtime
switch
Set the interval to
send
packets
Configure
internal FTP server
for a cluster
Configure
internal
server for a cluster
Configure
internal
host for a cluster
system-view
the
management-vlan vlan-id
cluster
ip-pool
administrator-ip-address
{ ip-mask | ip-mask-length }
current
as the build name
a
MAC
cluster-mac H-H-H
for the
cluster-mac
to send time-interval
the
for a holdtime seconds
handshake timer interval
an
ftp-server ip-address
an
TFTP
tftp-server ip-address
an
logging
logging-host ip-address
Huawei Technologies Proprietary
Command
syn-interval
2-8
Chapter 2 Cluster
Description
—
This is to specify
management VLAN on the
switch
—
Optional
Optional
The name argument is the
name to be assigned to the
cluster.
Optional
This is to set a multicast MAC
address for the cluster.
Optional
The time-interval argument is
the interval to send multicast
packets.
Optional
The seconds argument is the
holdtime, which is 60 seconds
by default.
Optional
The interval argument is the
interval to send handshake
packets, which is 10 seconds
by default.
Optional
Optional
Optional
the