Ipv6 Binding Configuration - NETGEAR GS700TP Software Administration Manual

GS700TP Smart Switch Software Administration Manual
1. Click Security > ACL > IPv6 Rules. The IPv6 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Enter the provided fields in the first row.
4. Click ADD to create a new entry or duplicate an existing entry.
5. Select the added entry.
6. Enter the provided fields in the first row.
7. Click APPLY to update the device.
To delete an IP rule:
1. Click Security > ACL > IPv6 Rules. The IPv6 Rules screen displays.
2. Select the ACL Name from the list in the provided field.
3. Select the rule entry.
4. Click DELETE to remove the entry.

IPv6 Binding Configuration

The IPv6 Binding Configuration screen contains information for mapping ACLs to IPv6
interfaces. When an ACL is bound to an interface, all the ACE rules that have been defined are
applied to the selected interface. Whenever an ACL is assigned on a port, LAG or, VLAN, flows
from that ingress interface that do not match the ACL are matched to the default rule, which is
Drop unmatched packets.
To bind interfaces to an ACL:
1.
Click Security > ACL > IPv6 Binding Configuration. The IPv6 Binding Configuration
screen displays:
6-35
v1.0, November 2009
Managing Security