8-Bit Ppg Output 2-Channel Independent Operation Mode - Fujitsu F2MCTM-16LX Hardware Manual

16.5.1

8-bit PPG Output 2-channel Independent Operation Mode

In the 8-bit PPG output 2-channel independent operation mode, the 8-/16-bit PPG timer
is set as an 8-bit PPG timer with two independent channels. PPG output operation and
interrupt request generation can be performed independently for each channel.
Setting for 8-bit PPG Output 2-channel Independent Operation Mode
Operating the 8-/16-bit PPG timer in the 8-bit PPG output 2-channel independent operation mode requires
the setting shown in Figure 16.5-2 .
Figure 16.5-2 Setting for 8-bit PPG Output 2-channel Independent Operation Mode
PPGCm/PPGCn
PPGnm
PRLHn/PRLLn
PRLHm/PRLLm
: Used bit
- : Undefined bit
1 : Set 1
0 : Set 0
Note: n = C, E
m = n + 1
Note:
Use the word instruction to set both High-level and Low-level PPG reload registers (PRLLn/PRLHn and
PRLLm/PRLHm) at the same time.
bit15 14 13 12 11
−
PEN1 PE1 PIE1 PUF1
1
(Reserved area)
PPGn set High level side reload values.
PPGm set High level side reload values.
10 9 bit8 bit7 6
Re-
PEN0 −
MD1 MD0
served
0 0 1 1
PCS2 PCS1 PCS0
PPGn set Low level side reload values.
PPGm set Low level side reload values.
CHAPTER 16 8-/16-BIT PPG TIMER
5 4 3 2 1
− −
PE0 PIE0 PUF0
− REV
PCM2 PCM1 PCM0
bit0
Re-
served
1
301