Fujitsu F2MCTM-16LX Hardware Manual page 5

PREFACE
Objectives and intended reader
Thank you very much for your continued patronage of Fujitsu semiconductor products.
The MB90360 series has been developed as a general-purpose version of the F
which is an original 16-bit single-chip microcontroller compatible with the Application Specific IC
(ASIC).
This manual explains the functions and operation of the MB90360 series for engineers who actually
use the MB90360 series to design products. Please read this manual first.
Trademark
2
F MC, an abbreviation of FUJITSU Flexible Microcontroller, is a registered trademark of FUJITSU
Ltd.
Embedded Algorithm is a registered trademark of Advanced Micro Devices Inc.
Structure of this preliminary manual
This manual contains the following 26 chapters and appendix.
CHAPTER 1 OVERVIEW
The MB90360 Series is a family member of the F
CHAPTER 2 CPU
This chapter explains the CPU.
CHAPTER 3 INTERRUPTS
This chapter explains the interrupts and function and operation of the extended intelligent I/O
service in the MB90360 series.
CHAPTER 4 DELAYED INTERRUPT GENERATION MODULE
This chapter explains the functions and operations of the delayed interrupt generation module.
CHAPTER 5 CLOCKS
This chapter explains the clocks used by MB90360 series microcontrollers.
CHAPTER 6 CLOCK SUPERVISOR
This chapter explains the function and the operation of the clock supervisor. Only the product
with built-in clock supervisor of the MB90360 series is valid to this function.
CHAPTER 7 RESETS
This chapter describes resets for the MB90360-series microcontrollers.
CHAPTER 8 LOW-POWER CONSUMPTION MODE
This chapter explains the low-power consumption mode of MB90360 series microcontrollers.
CHAPTER 9 MEMORY ACCESS MODES
This chapter explains the functions and operations of the memory access modes.
2
MC-16LX micro controllers.
i
2
MC-16LX family,