Fujitsu F2MCTM-16LX Hardware Manual page 24

CHAPTER 1 OVERVIEW
Table 1.1-3 MB90360 Features (2/2)
Features
CAN interface
External interrupt (8
channels)
D/A converter
Low voltage/CPU
operation detection
reset
Clock supervisor
Subclock
(Maximum 100 kHz)
I/O port
Flash memory
ROM security
*:Embedded Algorithm is a registered trademark of Advanced Micro Device Inc.
8
MB90F362/T(S), MB90362/T(S)
MB90F367/T(S), MB90367/T(S)
1 channel
Conforms to CAN Specification Version 2.0 Part A and B
Automatic re-transmission in case of error
Automatic transmission responding to Remote Frame
16 message buffers for transmission/reception
Supports multiple messages
Flexible configuration of acceptance filtering:
• Full bit compare/Full bit mask/2 partial bit masks
• Supports up to 1 Mbps communication
Can be programmed edge sensitive or level sensitive
-
Corresponds to product with T-suffix only
MB90F367/T(S), MB90367/T(S) only
Corresponds to product without T-suffix only
Corresponds to MB90V340A-102/MB90V340A-104 only
Supports general-purpose I/O (CMOS output):
- 34 ports (product without S-suffix)
- 36 ports (product with S-suffix)
Input level setting:
- Port2, Port4, Port6, Port8: selectable from
CMOS/Automotive level
Supports automatic programming, Embedded Algorithm
commands
A flag indicating completion of the algorithm
Number of erase cycles: 10,000 times
Data retention time: 20 years
Flash Security Feature for protecting the content of the Flash
Protects the content of ROM (MASK ROM
product only)
MB90V340A-101, MB90V340A-102
MB90V340A-103, MB90V340A-104
3 channels
2 channels
-
-
Supports general-purpose I/O (CMOS output):
- 80 ports (product without S-suffix)
- 82 ports (product with S-suffix)
Input level setting
- Port 0 to Port 3: selectable from CMOS/
Automotive/TTL level
- Port 4 to Port A: selectable from CMOS/
Automotive level
TM*
, Write/Erase/Erase-Suspend/Resume
-