Basic Configuration Of Serial Programming Connection With Mb90F362/T(S), Mb90F367/T(S) - Fujitsu F2MCTM-16LX Hardware Manual

CHAPTER 25 EXAMPLES OF MB90F362/T(S), MB90F367/T(S) SERIAL PROGRAMMING CONNECTION
25.1 Basic Configuration of Serial Programming Connection
with MB90F362/T(S), MB90F367/T(S)
The MB90F362/T(S), MB90F367/T(S) supports on-board writing (Fujitsu standard) of the
flash ROM. This section provides the related specifications.

Basic Configuration of Serial Programming Connection with MB90F362/T(S), MB90F367/T(S)

Fujitsu standard serial on-board writing uses the Yokogawa Digital Computer Corporation AF220/AF210/
AF120/AF110 flash microcontroller programmer.
Figure 25.1-1 shows the basic configuration for the example serial programming connection of MB90F362/
T(S), MB90F367/T(S).
Figure 25.1-1 Basic Configuration MB90F362/T(S), MB90F367/T(S) Serial Programming Connection
Note:
For information on the functions of and operational procedures related to the flash microcontroller
programmer (AF220/AF210/AF120/AF110), the general-purpose common cable (AZ210) for
connection, and the connector, contact Yokogawa Digital Computer Corporation.
554
Host interface cable
AF220/AF210/
AF120/AF110
flash
RS232C
microcontroller
programmer
+
memory card
Stand-alone operation enabled
General-purpose
common cable (AZ210)
MB90F362/T(S),
CLK synchronous
MB90F367/T(S)
serial
User system