Transmission Interrupt Enable Register (Tier) - Fujitsu F2MCTM-16LX Hardware Manual

CHAPTER 21 CAN CONTROLLER
21.4.16

Transmission Interrupt Enable Register (TIER)

This register enables or disables the transmission interrupt by the message buffer (x).
The transmission interrupt is generated at transmission completion (when TCx of the
transmission complete register (TCR) is 1).
Register Configuration
Figure 21.4-16 Configuration of the Transmission Interrupt Enable Register (TIER)
Address
CAN1: 007D0F
Address
CAN1: 007D0E
R/W : Read/Write
Register Function
0: Transmission interrupt disabled.
1: Transmission interrupt enabled.
472
bit15 bit14 bit13
TIE15 TIE14 TIE13
H
R/W R/W R/W
bit7 bit6 bit5
TIE7 TIE6 TIE5
H
R/W R/W R/W
bit12 bit11 bit10
TIE12 TIE11 TIE10
R/W R/W R/W
bit4 bit3 bit2
TIE4 TIE3 TIE2
R/W R/W R/W
bit9 bit8 TIER1(Upper)
TIE9 TIE8 Reset value
0 0 0 0 0 0 0 0
R/W R/W
bit1 bit0 TIER1(Lower)
TIE1 TIE0 Reset value
0 0 0 0 0 0 0 0
R/W R/W
B
B