16-Bit Ppg Output Operation Mode; Setting For 16-Bit Ppg Output Operation Mode - Fujitsu F2MCTM-16LX Hardware Manual

CHAPTER 16 8-/16-BIT PPG TIMER
16.5.2

16-bit PPG Output Operation Mode

In the 16-bit PPG output operation mode, the 8-/16-bit PPG timer is set as a 16-bit PPG
timer with one channel.

Setting for 16-bit PPG Output Operation Mode

Operating the 8-/16-bit PPG timer in the 16-bit PPG output operation mode requires the setting shown in
Figure 16.5-4 .
PPGCm/PPGCn
PPGnm
PRLHn/PRLLn
PRLHm/PRLLm
: Used bit
: Unused bit
- : Undefined bit
1 : Set 1
0 : Set 0
Note: n = C, E
m = n + 1
Note:
Use a long-word instruction to set the values in the PPG reload registers or a word instruction to set the
PPGn and PPGm (PRLLn --> PRLLm or PRLHn --> PRLHm) in this order.
304
Figure 16.5-4 Setting for 16-bit PPG Output Operation Mode
bit15 14 13 12 11
−
PEN1 PE1 PIE1 PUF1
1
(Reserved area)
PPGn set high level side reload values of lower
8 bits.
PPGm set high level side reload values of upper
8 bits.
10 9 bit8 bit7 6
Re-
PEN0 −
MD1 MD0
served
1 1 1 1
PCS2 PCS1 PCS0
PPGn set low level side reload values of lower
8 bits.
PPGm set low level side reload values of upper
8 bits.
5 4 3 2 1
− −
PE0 PIE0 PUF0
− REV
PCM2 PCM1 PCM0
bit0
Re-
served
1