Fujitsu F2MCTM-16LX Hardware Manual page 572

CHAPTER 25 EXAMPLES OF MB90F362/T(S), MB90F367/T(S) SERIAL PROGRAMMING CONNECTION
programmer)
Table 25.1-2 System Configuration of Flash Microcontroller Programmers (Manufactured by Yokogawa
Digital Computer Corporation)
Model
Main AF220/AC4P
unit
AF210/AC4P
AF120/AC4P
AF110/AC4P
AZ221
AZ210
FF201
AZ290
/P2
/P4
Inquiries: Yokogawa Digital Computer Corporation
Telephone number: (81)-42-333-6224
Note:
Although the AF200 flash microcontroller programmer is no longer manufactured, the programmer still
can be used in combination with the FF201 control module.
Examples of serial programming connection can correspond to the connection example as shown in
" Oscillating Clock Frequency and Serial Clock Input Frequency".
Oscillating Clock Frequency and Serial Clock Input Frequency
The equation listed below can be used to calculate the serial clock frequencies that can be used for the
MB90F362/T(S), MB90F367/T(S).
Serial clock frequency that can be input = 0.125 * example of oscillation clock frequency
Set an appropriate serial clock input frequency in the flash microcontroller programmer according to the
oscillating clock frequency in use.
Table 25.1-3 Examples of Serial Clock Frequencies that can be Input
Oscillating clock
frequency
4 MHz
8 MHz
16 MHz
556
Ethernet interface built-in model and 100 V to 220 V AC power adapter
Standard model and 100 V to 220 V AC power adapter
Single-key Ethernet interface built-in model and 100 V to 220 V AC power adapter
Single-key model and 100 V to 220 V AC power adapter
RS232C cable for programmer PC/AT
Standard target probe (a) cable length: 1 m
2
Fujitsu F MC-16LX flash microcontroller control module
Remote controller
2MB PC Card (optional) for flash memory sizes up to 128 KB
4MB PC Card (optional) for flash memory sizes up to 512 KB
Maximum serial clock
frequency that can be input for
microcontrollers
500 kHz
1 MHz
2 MHz
Function
Maximum serial clock
frequency that can be used for
the AF220, AF210, AF120 and
AF110
500 kHz
850 kHz
1.25 MHz
Maximum serial clock
frequency that can be used for
the AF200
500 kHz
500 kHz
500 kHz