Configure Dvmrp Add Vlan - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
IP Multicast Commands
configure dvmrp add vlan
configure dvmrp add vlan [<vlan name> | all]
Description
Enables DVMRP on one or all IP interfaces.
Syntax Description
vlan name
all
Default
Disabled.
Usage Guidelines
If
is specified, DVMRP is enabled on all IP interfaces. When an IP interface is created, DVMRP is
all
disabled by default.
Example
The following command enables DVMRP on the VLAN accounting:
configure dvmrp add vlan accounting
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on the "i" series of switches only.
2008
Specifies a VLAN name.
Specifies all VLANs.
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?
Questions and answers