MPLS Commands—BlackDiamond Switch Only
configure mpls delete tls-tunnel
configure mpls delete tls-tunnel [<tunnel_name> | group <groupid> | all]
Description
Deletes one or all TLS tunnels.
Syntax Description
tunnel_name
Specifies a TLS tunnel name.
group <groupid>
Specifies a group identifier
all
Specifies all TLS tunnels.
Default
N/A
Usage Guidelines
This command deletes the TLS tunnel with the specified tunnel name. Specify the
want to delete all TLS tunnels belonging to a specific group. Specify the
delete all TLS tunnels belonging to a specific group. Use the
Example
The following command deletes the TLS tunnel rt40:
configure mpls delete tls-tunnel rt40
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
2436
<groupid>
if you want to
<groupid>
keyword to delete all TLS tunnels.
all
ExtremeWare 7.5 Command Reference Guide
if you