Configure Bgp Peer-Group Source-Interface - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure bgp peer-group source-interface

configure bgp peer-group <peer-group-name> source-interface [any |
ipaddress <ipAddr>]
Description
Configures the source interface for a peer group and all the neighbors of the peer group.
Syntax Description
peer-group-name
any
ipAddr
Default
N/A.
Usage Guidelines
The source interface IP address must be a valid IP address of a VLAN configured on the switch.
Changes made to the parameters of a peer group are applied to all neighbors in the peer group.
Modifying the following parameters automatically disables and enables the neighbors before changes
take effect:
remote-as
●
timer
●
source-interface
●
soft-in-reset
●
password
●
Example
The following command configures the source interface for the peer group outer and its neighbors on
10.34.25.10:
configure bgp peer-group outer source-interface ipaddress 10.34.25.10
History
This command was first available in ExtremeWare XOS 10.1.
This command required an Advanced Core license in ExtremeWare XOS 11.1.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies a peer group.
Specifies any source interface.
Specifies an interface.
configure bgp peer-group source-interface
1721