Part Code 6805 - HP XP P9500 Manual

Part code 6805

Table 60 Error codes (part code 6805)
Part Error
Code Number
6805 5099
6805 6012
6805 6023
6805 7060
6805 71 1 1
6805 7310
6805 8001
6805 8002
6805 81 10
6805 8310
6805 8659
6805 55009
6805 55010
6805 55209
6805 55210
6805 5521 1
6805 55212
6805 55213
Error Message
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The SVP is busy.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
This error code is not registered.
A communication time-out error occurred
in the subsystem.
Error happened after some change
occurred. Please refresh the array
configuration. Please retry later.
Communication is busy.
The configuration could not be changed.
The storage system status is invalid.
No PCBs are installed.
An invalid CLPR No. was detected.
An invalid SLPR No. was detected.
The maximum number of CLPRs that can
be created was exceeded.
The Block Option setting is incorrect.
The Do not Block (Volume Level) option
setting is incorrect.
The options "Block Option" and "Do not
Block (Volume Level)" cannot be
specified at the same time.
The Level 1 Threshold setting is incorrect.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Please wait for a while, and then retry
the operation. If this problem persists,
please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
If the same error occurs despite retrying,
please contact HP Technical Support.
Please wait for a while, and then retry
the operation. If this problem persists,
please contact HP Technical Support.
Retry later.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Install the necessary PCBs.
Correct the cache resource number (CLPR
No.), then retry the operation. If this
problem persists, please contact HP
Technical Support.
Please contact HP Technical Support.
Specify the number of CLPRs within the
valid range.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Severity
Level
E
E
W
E
E
E
W
W
E
E
E
W
E
W
W
W
W
W
Part code 6805 241