Download Print this page

HP XP P9500 Manual: Part Code 6810

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 60 Error codes (part code 6805) (continued)
Part
Error
Code
Number
6805
55214
6805
55215
6805
55216
6805
55217
6805
55218
6805
55219
6805
55220
6805
55221
6805
56524

Part code 6810

Table 61 Error codes (part code 6810)
Part
Error
Code
Number
6810
5122
6810
7440
6810
9101
6810
9102
6810
9106
6810
9107
6810
91 1 1
242 Message (part code group 6nnn)
Error Message
The Level 2 Threshold setting is incorrect.
The Level 1 SIM setting is incorrect.
The Level 2 Suspend setting is incorrect.
The maximum number of SLPRs that can
be set was exceeded.
The Level 1 Sleep setting is incorrect.
The Sleep Time setting is incorrect.
The SLPR number is duplicated.
The CLPR number is duplicated.
This function cannot be used by the
storage partition administrator.
Error Message
No data has been changed.
An error occurred during SVP
processing.
Do you want to cancel?
Do you want to apply?
The value that is under setup is not
reflected yet. Do you want to change the
mode?
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
Do you want to delete the specified line
of settings from the Preview list?
Recommended Action
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Please contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Please contact HP Technical Support.
Correct the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
Please contact HP Technical Support.
Recommended Action
The operation has been rejected because
there is no data to set. Click [OK], then
go on to the next operation.
If this problem persists, please contact
HP Technical Support.
To cancel the operation, click [OK].
To execute the operation in Preview,
click [OK].
To change the mode, click [OK].
Otherwise, click [Cancel].
To continue the processing, click [OK].
Otherwise, click [Cancel].
To delete the specified line of settings
from the Preview list, click [OK].
Otherwise, click [Cancel].
Severity
Level
W
W
W
E
W
W
E
W
E
Severity
Level
W
E
i
i
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: