HP XP P9500 Manual page 245

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 62 Error codes (part code 7005) (continued)
Part
Error
Error Message
Code
Number
7005
8502
You cannot reserve the volume, because
a remote copy pair exists in the same
subsystem frame.
7005
8503
You cannot create the new pair, because
a remote copy pair exists in the same
subsystem frame.
7005
8504
The command was rejected. Check the
composition, the status, or the volume
status of the pair.
7005
8505
The command has been rejected,
because the operation cannot be
accepted in the current pair status.
7005
8506
The command has been rejected,
because the specified S-VOL or reserved
volume is used by the host.
7005
8507
The Pairsplit command was issued to the
pairs in a PSUS status.
7005
8508
The Paircreate command was issued to
the pairs in a PSUS status.
7005
8509
The Split command with the QUIESCE
specification was issued to a secondary
boot device.
7005
8510
The M-VOL Suspend command was
issued to a secondary boot device.
7005
851 1
You cannot reserve the volume, because
a path group is set.
7005
8512
Cannot perform Pairresync or Pairsplit-E
operation because of the path group
setting.
7005
8513
The command has been rejected,
because the specified P-VOL is used by
the host.
7005
8514
No reserved volume can be allocated.
7005
8515
The number of cylinders in the reserved
volume exceeds the maximum.
7005
8516
The number of P-VOL cylinders exceeds
the maximum.
7005
8517
The number of S-VOL cylinders exceeds
the maximum.
7005
8518
You cannot create a pair because the
track format is different.
Recommended Action
Delete the Remote Copy pair.
Delete the Remote Copy pair.
Confirm the composition, the status, or
the volume status of the pair. (See the
HP P9000 Business Copy User Guide
for the relation between the composition
of the pair, status of the pair, or the
volume status of the pair and those
operations.)
See the section "Operations permitted
for L1, L2 pairs" in the HP P9000
Business Copy User Guide for the
relation between the status of pairs and
the commands that can be accepted.
Vary the S-VOL or the reserved volume
offline from the mainframe host, then
issue the command again.
You cannot execute the Pairsplit
command because the pair is already in
the PSUS status.
You cannot execute the Pairsplit
command because the pair is already in
the PSUS status.
Check the contents, and retry.
Check the contents, and retry.
Detach the S-VOL from the host, or delete
the Remote Copy path.
Detach the S-VOL from the host, or delete
the Remote Copy path.
Vary the P-VOL offline from the
mainframe host, then issue the command
again.
Delete the Reserve volume.
Check the contents, and retry.
Check the contents, and retry.
Check the contents, and retry.
Check if the specified emulation type is
the same or not.
Severity
Level
W
W
W
E
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7005 245

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents