HP XP P9500 Manual page 208

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Code
Number
6505
58510
6505
58530
6505
58531
6505
58532
6505
58550
6505
58552
6505
58553
6505
58560
6505
58561
6505
58562
208 Message (part code group 6nnn)
Error Message
The Add Pair (Paircreate) operation
failed.
The combination of the specified primary
data volume number (LDKC:CU:LDEV)
and the mirror ID is the same as the
combination specified from another
primary subsystem.
Please check the mirror ID assigned to
the specified primary data volume
number (LDKC:CU:LDEV) from the
secondary subsystem.
In the current microcode version, please
specify a mirror ID different from the ID
used by an existing pair, when you
create a pair by using the same primary
data volume number (LDKC:CU:LDEV).
The capacity of the specified volume is
too small.
A journal volume cannot be added
because the combination of the
emulation types for the journal volumes
is not correct.
The Add Pair (Paircreate) operation
failed, because the emulation type is
different between the master journal and
the restore journal.
The operation to add journal volumes
failed due to the mirror status of the
specified journal.
The operation failed because the license
of the Mainframe Array Management
was not installed in the remote
subsystem.
The specified volume cannot be used as
a journal volume because it is used by
Parallel Access Volumes.
A journal volume cannot be added
because the capacity of shared memory
is insufficient.
The Add Pair operation or the Resume
Pair operation failed, because the timer
type of the master journal was different
from the one of restore journal.
The specified volumes or the volumes in
the specified journal were deleted.
However, the blockade of the volumes
failed.
Record the volumes that could not be
blocked.
And, clear the Preview list.
Then please contact HP Technical
Support to block the volumes.
Recommended Action
Check the mirror ID assigned to the
specified primary data volume number
(LDKC:CU:LDEV) from the secondary
storage system, and assign a mirror ID
that is not used, and retry the operation.
Check the capacity of the volume, and
specify a volume with larger capacity.
Check the emulation types of the
specified volumes.
Check the emulation type of the master
and the restore journal.
Check the mirror status of the specified
journal.
Install Mainframe Array Management in
the remote storage system or change the
access attribute of the specified primary
data volume to Read/Write.
Check whether the specified volume is
used by Parallel Access Volumes.
Please contact HP Technical Support to
install additional shared memory.
Check the timer type of the master and
the restore journal.
Record the volumes that could not be
blocked.
Clear the Preview list.
Please contact HP Technical Support to
block the volumes.
Write down the volumes that failed to
be blocked. Close the Continuous Access
Journal or Continuous Access Journal Z
window. Block the volumes by using
[Block LDEVs] function in the Logical
Severity
Level
W
W
W
W
W
W
W
E
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents