HP XP P9500 Manual Page 213

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 56 Error codes (part code 6505) (continued)
Part
Error
Error Message
Code
Number
6505
58686
The specified operation failed, because
the attribute of the journal of the remote
storage system was not "restore."
6505
58687
The status of the other mirror of the Delta
resync did not change.
6505
58688
Delta resync failed because the specified
primary data volume was not ready for
Delta resync.
6505
58689
The operation failed, because the status
of some mirrors in the master or restore
journal was invalid. Check the status of
the mirrors in the specified journal.
6505
58690
The recovery to the status ready for Delta
resync failed because the status of the
specified primary data volume was one
of the following:
The primary data volume is being
copied; correction copy or drive copy
is in progress.
The primary data volume is in
correction access status.
The primary data volume is blocked.
The primary data volume is being
maintained.
The access attribute of the primary
data volume is Read Only.
6505
58691
The specified mirror ID is already used
in the restore journal.
Specify another mirror ID.
6505
58692
The specified master journal cannot be
used for Delta resync, because it is
registered in the extended consistency
group (EXCTG).
6505
58693
The specified restore journal cannot be
used for Delta resync, because it is
registered in the extended consistency
group (EXCTG).
6505
58694
The Delta resync operation failed. Check
the status of the secondary data volume,
or the status of the connected
communication line.
6505
58695
No more journals can be allocated to
the specified command device.
Delete the journals registered in the
extended consistency group (EXCTG),
Recommended Action
Swapping when it is referenced from
the RAID Manager or Business
Continuity Manager.
Check the attribute of the journal of the
remote storage system.
If the problem persists despite retrying,
contact HP Technical Support.
Check the status of the specified primary
data volume.
Check the status of the mirrors in the
specified journal.
Check the status on the primary data
volume.
Specify another mirror ID.
Check the status of the master journal.
Check the status of the restore journal.
Check the status of the secondary data
volume, or the status of the connected
communication line. When no
abnormality is found in the status of the
secondary data volume or the
communication line, please contact HP
Technical Support.
Delete the journal registered in the
extended consistency group (EXCTG),
then retry the operation with another
command device.
Severity
Level
W
W
W
W
W
W
W
W
W
W
Part code 6505
213

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: