HP XP P9500 Manual page 330

Table 97 Error codes (part code 20123) (continued)
Part Error
Code Number
20123 10701 1
20123 107012
20123 107013
20123 107014
20123 107015
20123 107016
20123 107017
20123 107018
20123 107019
20123 107020
20123 107021
20123 107022
20123 107023
330 Message (part code group 20nnn)
Error Message
Failed to get the RMI Lock.
Failed to release the RMI Lock.
An error occurred while refreshing.
An error occurred while refreshing.
A network error occurred. It is not
possible to connect with the SVP due to
one of the following reasons.
The SVP was not ready.
An error occurred in the SVP.
A timeout error occurred while
communicating with the SVP.
A network error occurred. It is not
possible to connect with the SVP due to
one of the following reasons.
The SVP was not ready.
An error occurred in the SVP.
An error occurred during SVP
processing.
A network error occurred. It is not
possible to connect with the SVP because
a timeout error occurred while
communicating with the SVP.
Failed to restore the user account list file.
An unsupported version of JRE is used.
An internal logic error occurred.
An internal logic error occurred.
An internal logic error occurred.
Recommended Action
Do the following.
This operation cannot be done while
another user is changing the
configuration. Wait for a while, and
then retry the operation.
This operation cannot be done while
a task is in progress. Wait for a
while, and then retry the operation.
If there is a task in waiting status,
suspend it by executing [Suspend Tasks]
before executing any new tasks.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
If the problem persists despite retrying,
please contact HP Technical Support.
Check the internet protocol (IP) address.
If the IP address is correct, terminate the
browser (also terminate the storage list
browser), then log it in again. If the
problem persists despite retrying, please
contact HP Technical Support.
Check the internet protocol (IP) address.
If the IP address is correct, terminate the
browser (also terminate the storage list
browser), then log it in again.
If this problem persists, please contact
HP Technical Support.
Log in again.
If this problem persists, please contact
HP Technical Support.
Install a supported version of JRE, then
retry the operation.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Refresh the window, then retry the
operation. If the same problem persists
despite retrying, please contact HP
Technical Support.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
Severity
Level
W
E
E
E
E
E
E
E
E
W
E
E
E