HP XP P9500 Manual page 152

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 53 Error codes (part code 6005) (continued)
Part
Error
Code
Number
6005
8700
6005
8701
6005
8702
6005
8703
6005
8704
6005
8705
6005
8706
6005
8708
6005
8709
6005
8710
6005
871 1
6005
8712
152 Message (part code group 6nnn)
Error Message
Please retry operation.
Logical Path between the MCU and the
RCU is not active.
The specified volume is not a M-VOL.
The specified number of Paths is less
than the Minimum number of Paths on
RCU Option screen.
The specified number of paths is less
than the minimum number of paths on
the RCU option screen due to a
communication error between the MCU
and the RCU.
The path could not be deleted due to a
communication error between MCU
and RCU.
Parameter specified by Remote Copy
operation is invalid.
The pair status of the R-VOL is not valid.
Remote Copy operation was rejected.
The pair status of the specified volume
is not valid.
The Port, GID, LUN, CU, or LDEV
number of the specified volume is
incorrect.
The operation was rejected due to a
'FREEZE' state.
Recommended Action
Retry the operation.
A logical path does not exist
between the MCU and the
RCU. Check the path status
on RCU Status dialog box,
and reestablish the paths
with Edit Path.
Refresh the window, and
check whether the specified
volume is a M-VOL.
The number of paths is less
than the minimum number
specified on the RCU Option
dialog box. Check the
number of paths, establish
the minimum number of
paths, and retry the
operation.
Check the paths status and
reestablish the paths.
Either a communication error
occurred between the MCU
and the RCU, or the CHA
has become blocked. Please
contact HP Technical
Support.
Specify a correct value.
Check the pair status for
Continuous Access
Synchronous. If the
requested R-VOL is in a
permissible status, please
retry the operation.
All channel adapters are not
active for Continuous Access
Synchronous. Please contact
HP Technical Support.
The pair status does not
permit this operation. Verify
the pair status, and if the
operation is permitted retry.
Check if the specified Port,
GID, LUN, CU, or LDEV
number exists in the storage
system.
If this was a path operation
retry after the problem has
been fixed.
If this was a pair operation,
retry after the paths have
Severity Level
W
W
W
W
W
W
W
W
E
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents