HP XP P9500 Manual page 292

Table 68 Error codes (part code 8105) (continued)
Part Error
Code Number
8105 5786
8105 5789
8105 5790
8105 5876
8105 6012
8105 6023
8105 6513
8105 6524
8105 7060
8105 71 1 1
8105 65639
8105 66003
8105 66005
8105 66006
8105 66008
8105 66010
8105 75009
292 Message (part code group 8nnn)
Error Message
The path can be defined only for the A,
E, J or N port.
The intermediate volume cannot be
specified as a command device.
A program error occurred under internal
process.
The setting cannot be done because you
have no access right to the subject
resource group.
An error occurred during SVP
processing.
The SVP is busy. Please wait for a while,
and then retry the operation.
A command was double started.
The port information is inconsistent with
PCB mode information.
An error occurred during SVP
processing.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
The DKC serial number does not match.
Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
The spreadsheet declaration statement
or the definition statement is not entered
in the spreadsheet file.
The number of data items entered in the
spreadsheet has exceeded the limit.
The number of digits is invalid.
The format is invalid.
The selected WWN has been registered
in a host group.
Recommended Action
Correct the name of port.
Correct the CU and LDEV.
If nothing changes despite retrying,
please contact HP Technical Support.
All the resource group IDs that are set to
the storage system must be assigned to
the user account that logs in to Remote
Web Console.
If this problem persists, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Retry the operation a little later.
Correct the port information or the PCB
mode information.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the spreadsheet, and match the
serial number under the [SerialNumber]
function tag and the DKC serial number.
Check the spreadsheet, and make only
one description of the [SerialNumber]
function tag.
Check the spreadsheet, and enter a
serial number under the [SerialNumber]
function tag.
Check the spreadsheet, and enter only
one serial number under the
[SerialNumber] function tag.
Check the spreadsheet, and set the
number of digits of the serial number
under the [SerialNumber] function tag
to five or less.
Check the spreadsheet, and change the
serial number under the [SerialNumber]
function tag to a decimal numeral.
Check the settings, then retry the
operation.
Severity
Level
W
W
W
W
E
W
E
W
E
E
E
E
E
E
E
E
W