HP XP P9500 Manual page 57

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 23 Error codes (part code 00622) (continued)
Part
Error
Error Message
Code
Number
00622
105239
The number of alternate paths that can
be set to an external volume exceeds the
maximum.
00622
105240
Failed to allocate an External Path Group
ID.
00622
105241
An external volume that can be added
was not found by the result of
VolumeDiscovery.
00622
105242
An external volume is selected, where
Volume Discovery executed ends with
an error.
00622
105243
The emulation type that cannot coexist
is set.
00622
105244
The specified external volume cannot be
set because the path configuration is
different.
00622
105245
Failed to allocate a LDEV ID.
00622
105246
Failed to allocate a SSID.
00622
105251
The external volume is not supported.
00622
105255
Only one LDEV can be set because the
attribute of the specified external volume
is Remote Command Device.
00622
105256
Only one LDEV can be set because the
specified external volume is in the data
transfer mode.
00622
105257
LDEV Name cannot be set because the
value is out of range.
00622
105258
The path cannot be changed because
there will be no normal path for the
external volume.
00622
105262
LDEV Name can not be registered
because there is a volume that failed to
be created as an external volume.
00622
105265
Insufficient logical volumes to map the
external volumes.
00622
105266
Insufficient logical volumes to map the
external volumes.
00622
105267
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
right is connected to the specified
external path.
00622
105268
The operation cannot be done because
the port which belongs to a resource
group to which the user has no access
Recommended Action
Check the number of selected alternate
paths.
Check the number of registered external
path groups.
See the manual of the external device
and check the setting of the external
volume.
Resolve the cause of the error, or only
select an available external volume.
Check the setting(s).
Check the contents of the path
configuration.
Check the setting(s).
Check the setting(s).
Resolve the cause of the error, or only
select an available external volume.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Select one or more normal path, or
restore the path.
Edit LDEVs, or recreate external volumes
if you want to register the LDEV Name.
Reduce the number of external volumes
to be mapped, then retry the operation.
Or, check the initial-number of LDEV ID
or the interval setting.
Reduce the number of external volumes
to be mapped, then retry the operation.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 00622
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents