HP XP P9500 Manual page 273

Hp p9000 remote web console messages (av400-96401, october 2011)
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 65 Error codes (part code 7105) (continued)
Part
Error
Error Message
Code
Number
7105
58259
The Quick Restore command has been
rejected, because the specified pair
contains external volumes, and also is
used as a Remote Copy pair.
7105
58260
The command has been rejected,
because the specified S-VOL is used as
M-VOL of Continuous Access
Synchronous Z pair.
7105
58261
The command has been rejected,
because the specified S-VOL is used as
R-VOL of Continuous Access Synchronous
Z pair.
7105
58262
A pair cannot be created because
shared memory for differential tables is
insufficient.
7105
58299
The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal Z.
7105
58300
The operation failed because the
specified T-VOL was a data volume of
Continuous Access Journal Z.
7105
58301
The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal Z.
7105
58351
The Quick Restore command has been
rejected because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal Z
pair.
7105
58356
The command was rejected because the
specified volume was used by
Continuous Access Journal Z and
Continuous Access Synchronous Z.
7105
58451
The disk subsystem is in internal process.
Please retry the operation.
7105
58518
The operation failed, because the
Snapshot pair(s) existed.
7105
58519
The operation failed, because the
Snapshot pair(s) existed.
7105
58520
The operation failed, because different
versions of microcodes coexisted in the
disk subsystem.
Recommended Action
Delete the Remote Copy pair or execute
the operation by other pairs.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the state of
Continuous Access Synchronous Z pair
and the Business Copy Z operations.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP P9000 Business
Copy for Mainframe Systems User Guide
for the relation between the state of
Continuous Access Synchronous Z pair
and the Business Copy Z operations.
Please add sufficient shared memory to
create a pair.
Check the requirements for using the
volume with Continuous Access Journal
Z.
Release the Continuous Access Journal
Z setting, or specify another volume.
Release the Continuous Access Journal
Z setting, or specify another volume.
Delete the Continuous Access Journal Z
pair or execute the operation by other
pairs.
To continue the operation, release the
Continuous Access Journal Z pair or the
Continuous Access Synchronous Z pair,
and then retry the operation.
If the problem persists despite retrying,
please contact HP Technical Support.
To continue the operation, delete all
Snapshot pair(s) and retry.
To continue the operation, delete all
Snapshot pair(s) and retry.
Replace the microcode, then retry the
operation.
Severity
Level
W
W
W
E
W
W
W
i
i
W
W
W
E
Part code 7105 273

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000P9500

Table of Contents