HP XP P9500 Manual page 180

Table 55 Error codes (part code 6010) (continued)
Part Error
Code Number
6010 5012
6010 5013
6010 5014
6010 5015
6010 5016
6010 5017
6010 5030
6010 5034
6010 5131
6010 5137
6010 5138
6010 5139
6010 5140
6010 5141
6010 5142
6010 5143
6010 5144
6010 7060
6010 7301
6010 7302
6010 7303
6010 7440
180 Message (part code group 6nnn)
Error Message
The Error Level value is invalid. Specify
the correct value.
The Fence value is invalid. Specify the
correct value.
The Force value is invalid. Specify the
correct value.
The R-VOL Write value is invalid. Specify
the correct value.
The Split-r/Suspend kind value is invalid.
Specify the correct value.
The Update value is invalid. Specify the
correct value.
The displayed information has not been
changed.
There are no RCUs in the CU. Please try
again after registering RCUs.
The combination of parameters which
you specified is not permitted. Please
specify a valid combination of
parameters.
The Operation value is invalid. Specify
the correct value.
The value specified for Gathering Interval
is invalid. Specify a valid value within
the range of 1 to 15.
The Script File Name value is invalid.
Specify the correct value.
The specified CU number is incorrect.
Specify the correct CU number.
The specified LDEV number is incorrect.
Specify the correct LDEV number.
The specified GID is incorrect. Specify
the correct GID.
The specified LUN is incorrect. Specify
the correct LUN.
Some of the entered values are incorrect.
Check the values and then specify
correct values.
An error occurred in the client logic.
An error occurred in the client logic.
An error occurred in the client logic.
An error occurred in the client logic.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
Recommended Action
Correct the specified contents, and retry.
Correct the specified contents, and retry.
Correct the specified contents, and retry.
Correct the specified contents, and retry.
Correct the specified contents, and retry.
Correct the specified contents, and retry.
Specify what you register, and retry.
Correct the specified contents, and retry.
Check the condition for setting
parameter, and re-execute the setting.
Check the contents, and retry.
Check the contents, and retry.
Check the contents, and retry.
Specify the correct CU number.
Specify the correct device number.
Specify the correct group number.
Specify the correct LUN.
Check the entered values, then specify
correct values.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
E
E
E
E
E