HP XP P9500 Manual page 142

Table 48 Error codes (part code 5205) (continued)
Part Error
Code Number
5205 75018
5205 75019
5205 75020
5205 75032
5205 75033
5205 75034
5205 75035
5205 75036
5205 75037
5205 76503
5205 76504
142 Message (part code group 5nnn)
Error Message
The volume specified as a migration
source cannot be used because its
emulation type is 3390-V.
The volume specified as a migration
target cannot be used because its
emulation type is 3390-V.
The volume specified as a reserved
volume cannot be used because its
emulation type is 3390-V.
The volume, whose emulation type is
3390-A, specified as a migration source
cannot be used due to one of the
following reasons:
The Mainframe Fibre CHA is not
mounted.
All the Mainframe Fibre CHAs are
blocked.
The volume, whose emulation type is
3390-A, specified as a migration target
cannot be used due to one of the
following reasons:
The Mainframe Fibre CHA is not
mounted.
All the Mainframe Fibre CHAs are
blocked.
The volume, whose emulation type is
3390-A, specified as a reserved volume
cannot be used due to one of the
following reasons:
The Mainframe Fibre CHA is not
mounted.
All the Mainframe Fibre CHAs are
blocked.
The volume specified as a migration
source cannot be used, because the THP
Pools are being initialized.
The volume specified as a migration
target cannot be used, because the THP
Pools are being initialized.
The volume specified as a reserved
volume cannot be used, because the THP
Pools are being initialized.
The LDEV that is specified as a migration
source cannot be used because the user
has no access right to a resource group
to which the LDEV belongs.
The LDEV that is specified as a migration
target cannot be used because the user
has no access right to a resource group
to which the LDEV belongs.
Recommended Action
Specify another volume.
Specify another volume.
Specify another volume.
If no Mainframe Fibre CHA is mounted
on the storage system, mount a
Mainframe Fibre CHA.
If all the Mainframe Fibre CHAs are
blocked, restore those Mainframe Fibre
CHAs.
If no Mainframe Fibre CHA is mounted
on the storage system, mount a
Mainframe Fibre CHA.
If all the Mainframe Fibre CHAs are
blocked, restore those Mainframe Fibre
CHAs.
If no Mainframe Fibre CHA is mounted
on the storage system, mount a
Mainframe Fibre CHA.
If all the Mainframe Fibre CHAs are
blocked, restore those Mainframe Fibre
CHAs.
Wait until the initialization of the THP
pools is completed, and then retry the
operation.
Wait until the initialization of the THP
pools is completed, and then retry the
operation.
Wait until the initialization of the THP
pools is completed, and then retry the
operation.
Verify the resources allocation for the
user with security administrator role.
Verify the resources allocation for the
user with security administrator role.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W