HP XP P9500 Manual: Part Code 3305

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 39 Error codes (part code 03222) (continued)
Part
Error
Code
Number
03222
105433
03222
105434

Part code 3305

Table 40 Error codes (part code 3305)
Part
Error
Code
Number
3305
1035
3305
1036
3305
1037
3305
1038
3305
1039
3305
1041
3305
1043
3305
1044
3305
1045
3305
1049
3305
1074
3305
1075
Error Message
environment. Verify if the system is
affected or not.
Reclaim Zero Pages cannot be done to
the TSE volume.
The TSE volume and the Thin
Provisioning Z volume cannot be
expanded at the same time.
Error Message
The SSIDs are not defined.
The size of the specified volume is
outside the setting range.
The free space remaining in the parity
group is not enough to install a
customized volume (CV).
The specified emulation type of the
customized volume (CV) is a type that
cannot be combined.
A path is defined to the specified
volume.
The CU number and the LDEV number
set in the VLL operation are the same as
those of other volumes.
An operation is specified for the
uninstalled VDEV.
An error occurred during SVP
processing.
The specified Subsystem ID already
exists. Specify another SSID.
An error occurred during SVP
processing.
The specified CU number cannot be set.
In the VLL operation (Create LDEVs,
Delete LDEVs), there are some operations
which cannot be set together are
specified.
Recommended Action
Check the setting(s).
Select volumes of the same attribute
when expanding.
Recommended Action
If this problem persists, please contact
HP Technical Support.
The size of volume that can be set differs
by the type of emulation.
Check the setting range of each
emulation type, then change the size of
volume.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
Check the setting.
Check and correct the settings.
Correct the settings, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
Correct the specified content, and issue
the request again.
If this problem persists, please contact
HP Technical Support.
Correct the settings.
Specify one or more than one operations
of Create LDEVs, Delete LDEVs in the VLL
operation.
Severity
Level
W
W
Severity
Level
E
W
E
E
W
W
W
E
W
E
W
E
Part code 3305
1 13

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: