HP XP P9500 Manual Page 45

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 19 Error codes (part code 0405) (continued)
Part
Error
Error Message
Code
Number
0405
8003
The subsystem status is invalid.
0405
8202
The DKCMAIN microcode does not
support this program product.
0405
8203
This program product needs a later
version of hardware. Please contact HP
Technical Support.
0405
8204
To use this program product, it is
required to enable the program product
by allocating additional shared memory.
Add cache memory in case of need.
0405
8205
This program product remains in the
configuration. Please contact HP
Technical Support.
0405
8206
This program product is in use, you
cannot remove this program.
0405
8301
The subsystem status is invalid.
0405
55263
The specified program product cannot
be removed, because the license for it is
allocated to the SLPR.
0405
55506
Since the licensed capacity of SLPR0 is
insufficient, the partition capacity can't
be increased.
0405
55520
It is not possible to install it because of
PP of pre-install.
0405
56524
This function cannot be used by the
storage partition administrator.
0405
57003
The contents of the license file are
incorrect. Please contact HP Technical
Support.
0405
57092
An error occurred during SVP
processing.
0405
57093
An error occurred during SVP
processing.
Recommended Action
Replacing the PC
Turning on, then off the DKC (care
should be taken.)
Isolate the abnormal section following
the procedure below:
Rebooting the PC. If this does not fix the
problem:
Checking the LAN card/LAN cable. If
this does not fix the problem:
Checking the IP address of the PC. If this
does not fix the problem:
Replacing the PC. If a new PC does not
fix the problem:
Turn the DKC on, then off (care should
be taken.
Contact HP Technical Support for the
plans of the program product to be
supported by DKCMAIN.
Please contact HP Technical Support.
Allocate additional shared memory, and
enable the program product.
Please contact HP Technical Support.
Stop using this program product function.
Retry this operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
If this problem persists, please contact
HP Technical Support.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Severity
Level
E
E
E
E
E
W
E
E
E
E
E
E
E
E
Part code 0405
45

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: