HP XP P9500 Manual Page 106

Hp p9000 remote web console messages (av400-96401, october 2011).
Hide thumbs

Advertisement

Table 37 Error codes (part code 03122) (continued)
Part
Error
Code
Number
03122
106036
03122
106037
03122
106038
03122
106041
03122
106042
03122
106062
03122
106063
03122
106064
03122
106077
03122
106078
03122
106080
03122
106087
03122
106090
03122
106091
03122
106093
03122
106094
106 Message (part code group 3nnn)
Error Message
The operation cannot be executed,
because the specified pool volumes
contain an abnormal pool volume.
The setting cannot be executed, because
the specified pool has no free space.
No table row, or two or more table rows
are selected.
There are no valid volumes, because the
pools are blocked.
The shrinking operation cannot be
performed on the specified pool.
The pool cannot be restored.
The pool cannot be restored.
The pool cannot be restored.
Four or more drive types cannot be
added to the specified pool.
The specified function is not available
because the necessary program product
is not installed.
A volume of different RAID level cannot
be specified in the same drive type.
The operation cannot be done because
there is no pool that can be associated
with a Thin Provisioning volume (V-VOL).
The depletion threshold is set lower than
the warning threshold.
The warning threshold is not input.
The depletion threshold is not input.
More than one volume type (drive type,
RAID level, or internal/external volume)
is used between the LDEVs selected for
the pool volumes. When different volume
types are used together in the same pool,
the performance will be impacted by the
lowest performing volume type. Confirm
that the selected LDEVs with a mix of
volume types are OK.
Recommended Action
Check the state of the specified pool
volumes, then retry the operation.
Execute any of the following actions,
then retry the operation.
Increase the pool capacity by adding
pool volume(s).
Reduce the pool usage.
Select one table row.
Restore the blocked status of the pools.
Check the pool capacity, the maximum
reserved capacity, and the current
reserved capacity, then retry the
operation.
Delete the pool.
Execute any of the following actions,
then retry the operation.
Increase the pool capacity by adding
pool volume(s).
Reduce the pool usage.
Block the pool.
Check the support configuration of pools,
then retry the operation.
Install the necessary program product.
Check the support configuration of pools,
then retry the operation.
Check the specified value of the
subscription limit, then retry the
operation.
Check the setting of depletion threshold
and warning threshold, then retry the
operation.
Check the setting of warning threshold,
then retry the operation.
Check the setting of the depletion
threshold, then retry the operation.
To continue the processing, click [OK].
Otherwise, click [Cancel].
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W

Advertisement

   Also See for HP XP P9500

   Related Manuals for HP XP P9500

Comments to this Manuals

Symbols: 0
Latest comments: